Engineering Drawing MCQs Practice Set-2

Page 1 of 5

1. This type of solid has two bases that are parallel equal polygons:

Cone

Torus

Prism

Pyramid

2. An oil refinery relies on which type of drafter to maintain and update the technical piping drawings used for the construction and maintenance of the facility.

Civil

Electrical

Process piping

Architectural

3. This type of weld is the most common in structural steel fabrication:

Fillet weld

Structural weld

Rivet weld

Beam weld

4. These are joined together in the field to build a structure:

Main members

Assembled fabrications

Riveted members

Steel fabrications

5. Welding drawings are a special type of this kind of drawing:

Perspective

Isometric

Assembly

Symbol

6. Technical drawings typically serve one of three purposes:

Visualization, Dimensioning, or Documentation

Visualization, Communication, or Documentation

Communication, Documentation, or Installation

Documentation, Installation, or Engineering

7. The Press-Pull tool will ________ the face of a solid model in the direction it faces.

Taper

Spiral

Extrude

None of these

8. This material is used in masonry construction, most commonly for ornamental facing:

Face brick

Aggregate

Natural stone

Clay tile

9. These maps are used to plan construction projects that locate construction features so they fit the topography of the area:

Landscape maps

Structure location plans

Subdivision plats

Structural topography maps

10. Circular shapes appear in this fashion when viewed at an angle other than 90 degrees:

Lengthened

Elliptical

Circular

Angular

Page 2 of 5

11. Students can complete an associate's degree in drafting which normally takes about __________ years to complete.

Four

Three

Two

One

12. This type of auxiliary view is projected onto a plane that is perpendicular to one of the principal planes of projection:

Secondary

Revolved

Successive

Primary

13. Perspective drawings are classified according to their number of these features:

Ground lines

Vanishing points

Station points

Picture planes

14. Architectural drafters generally prefer to use ________ drawings to help illustrate 3-dimensional views of a structure.

Perspective

Orthographic

Auxiliary

Isometric

15. Switches and relays should be shown in this position with no operating force or applied energy:

Application

Normal

Offset

Closed

16. This is a common method for connecting steel members of buildings and bridges:

Welding

Fabricating

Assembly

Riveting

17. The offset distance for the width (front to back) distance of the auxiliary view is the same distance of the ________ in the top view.

Length

None of these

Height

Width

18. This type of drawing is created to calculate areas, locate property lines, and locate building projects and facilities:

Traverse

City map

Plat

Contour

19. One way to evenly space dimensions on a drawing is to use the __________.

Continue tool

Dimension Space tool

Baseline tool

Linear tool

20. These are lines drawn on a map to locate, in the plan view, points of equal ground elevation:

Hatches

Profiles

Elevations

Contours

Page 3 of 5

21. In oblique projection, important shapes should be in this position relative to the viewing plane:

Perpendicular

Parallel

Adjacent

Rotated

22. In this type of concrete, the steel is pre-tensioned before the superimposed load is applied:

Aggregate

Reinforced

Pre-stressed

Preloaded

23. A circular arc is dimensioned in the view where you see its true shape by giving the value for its

Radius

Chord length

Arc length

Diameter

24. The maximum and minimum sizes of a feature are identified by a ________ tolerance.

Allowance

Limits

Reference

GD&T

25. A projection weld is a type of

Resistance weld

Arc weld

Fillet weld

Gas weld

26. This type of structural steel drawing shows all dimensions necessary for fabrication:

Weldment drawings

Shop drawings

Design drawings

Application drawings

27. These plans, made by the steel fabricator, are assembly drawings for the steel structure

Erection plans

Construction plans

Welding plans

Assembly plans

28. In a CAD system, you can draw an ellipse by specifying these

The center and radius

The center and major and minor axes

The bounding lines

The midpoint and end points

29. In this type of view, the cutting plane line indicates both the location of the cutting plane and the direction of sight:

Partial section

Removed section

Auxiliary section

Revolved section

30. The Free Orbit tool is found on the ________ toolbar.

3-D Move

Move

Rotate

Modify

Page 4 of 5

31. These are special installations of stone or concrete marking the locations of points accurately determined by precise surveying:

Hatches

Monuments

Topographic marks

Pillars

32. These weld symbols have no arrow-side or other-side significance:

Surface or groove weld

Flash and upset weld

Projection or seam weld

Back or backing weld

33. These are vertical distances above a common datum, reference plane, or point:

Plats

Traverse

Profiles

Elevations

34. This type of surface may be a plane, a single curved surface, or a warped surface

Developed surface

Ruled surface

Auxiliary surface

Edge surface

35. Baseline dimensions are referenced from a common geometric feature known as a ________.

Corner

Datum

Edge

Point of reference

36. This is a systematic approach that integrates the design and manufacture of products with the goal of optimizing the process

Traditional engineering design

Concurrent design

The manufacturing process

Design for recycling

37. This allows the designer to conceptualize objects more easily without having to make costly illustrations, models, or prototypes:

Computer-aided prototyping

Computer-aided design

Computer-aided manufacturing

Computer-aided engineering

38. A partial auxiliary view is used to show only the __________ in the auxiliary view.

None of these

The projected top view

Projected inclined plane

The projected side view

39. CAD programs which incorporate parametric modeling utilize a system in which the dimensions control the ________.

Shading used to render the model

All of the above

Perspective of the model

Size and shape of the model features

40. A secondary auxiliary view is a projection off of the __________.

None of these

Top view

Front view

Primary auxiliary view

Page 5 of 5

41. Oblique sections are useful to show this

Interior shapes

Oblique lines

Projected features

Foreshortened features

42. This is used in drawings to represent the edge of a solid object:

Angle

Vertex

Line

Surface

43. EDM is the acronym for:

Engineering data manipulation

Enterprise drawing manipulation

Engineering drawing management

Enterprise data management

44. This is the most common application for developments and intersections:

Mechanical engineering

Architecture

Piping

Sheet metal construction

45. The View toolbar will position the view of the 3-D solid toward the ________.

Front

All of these

SE isometric

Left side

46. The MASSPROP shortcut will provide the following information.

All of these

Volume

Mass

Bounding box

47. These maps are used in planning installations of trees, shrubbery, drives, and other garden features:

Topographic maps

Landscape maps

Engineering maps

Cadastral maps

48. The 3-D commands on the Modeling toolbar include __________.

Extrude

Box

Sphere

All of these

49. These are accurately drawn maps of cities and towns showing property lines and other features that control property ownership:

City maps

Cadastral maps

Topographic maps

Monument maps

50. Approximately this much of the cost of product development and manufacture is determined at the design stage

40-50 %

70-80 %

75-85 %

60-75 %

Engineering Drawing MCQs Practice Set-2

Related

1 Response

Leave a Reply to Εγγραφ στο www.binance.comCancel reply

Secured Payments

Protection

Engineering Drawing MCQs Practice Set-2

Share this Now with Friends:

Related

1 Response

Leave a Reply to Εγγραφ στο www.binance.comCancel reply

Secured Payments

Protection