Questions › Tag: Strength of MaterialsFilter:AllOpenResolvedClosedUnansweredSort byViewsAnswersVotesThe bending moment at the free end of a cantilever beam isOpenVideRime asked 4 years ago • Civil Engineering161 views0 answers0 votesThe bending moment on a section is maximum where shearing force isOpenVideRime asked 4 years ago • Civil Engineering155 views0 answers0 votesThe bending moment diagram for a cantilever subjected to a couple M at free end will beOpenVideRime asked 4 years ago • Civil Engineering1200 views0 answers0 votesA cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is doubled and the load reduced to half the deflection at the free end compared to original deflection would beOpenVideRime asked 4 years ago • Civil Engineering194 views0 answers0 votesBeams of uniform strength are better as compared to beams of uniform cross-section as they are economicalOpenVideRime asked 4 years ago • Civil Engineering395 views0 answers0 votesSlope and deflection at a point in a loaded cantilever beam carrying several loads can be found out by theOpenVideRime asked 4 years ago • Civil Engineering485 views0 answers-1 votesA steel beam of length 30 m is fixed between two supports at 8°C with no stress. Find the expansion allowances given if the stress in the bar is to be zero when temperature is raised to 50°C ( α= 12 ×10^-6 per °C, E = 2× 10^5 N/mm^2)OpenVideRime asked 4 years ago • Civil Engineering175 views0 answers0 votesIn a rectangular beam, when width, depth and length are doubled, the bending stressOpenVideRime asked 4 years ago • Civil Engineering985 views0 answers0 votesIn a uniform beam supported at one end in position, the maximum stress under self weight of bar shall occur at theOpenVideRime asked 4 years ago • Civil Engineering849 views0 answers0 votesA beam when subjected to an axial pull POpenVideRime asked 4 years ago • Civil Engineering151 views0 answers0 votes