Filter:AllOpenResolvedClosedUnansweredSort byViewsAnswersVotesIf the section factor and the hydraulic depth for a rectangular channel are 40 m and 4 m, respectively, then calculate the top width of the channel.OpenVideRime asked 1 year ago • Civil Engineering213 views0 answers0 votesA 3-degrees curve is situated on a ruling gradient of 1 in 250 on a broad Gauge track. What should be the actual ruling gradient considering the grade compensation of curvature?OpenVideRime asked 1 year ago • Civil Engineering81 views0 answers0 votesWith increase in the input power of pump, the efficiency of pump _________.OpenVideRime asked 1 year ago • Civil Engineering140 views0 answers0 votes____________ is the best suited method of irrigation for arid conditions in hot and windy areas so as to achieve optimum usage of irrigation water.OpenVideRime asked 1 year ago • Civil Engineering169 views0 answers0 votesIf the magnetic bearing of the Sun at a certain place in the Southern Hemisphere during noon is 336° 29’, then the magnetic declination at that place is __________.OpenVideRime asked 1 year ago • Civil Engineering214 views0 answers0 votesThe number of vibrations of a sound wave per unit time is measured in ______.OpenVideRime asked 1 year ago • Civil Engineering78 views0 answers0 votesThe following is the table containing data recorded during curve setting by using the twotheodolite method.OpenVideRime asked 1 year ago • Civil Engineering83 views0 answers0 votesCalculate the hook length of the bar in one side with a diameter of 16 mm.OpenVideRime asked 1 year ago • Civil Engineering82 views0 answers0 votesMunicipal solid waste is also known as:OpenVideRime asked 1 year ago • Civil Engineering67 views0 answers0 votesAs per IRC, when designing pedestrian and traffic signals using approximate method for a two-phase system, the minimum initial period with pedestrian signal should NOT be less than:OpenVideRime asked 1 year ago • Civil Engineering67 views0 answers0 votesShare this Now with Friends:WhatsAppTelegramMore