Filter:AllOpenResolvedClosedUnansweredSort byViewsAnswersVotesIf the quadrantal bearing of a line is N30W, then the whole circle bearing of the line isOpenVideRime asked 1 week ago • Civil Engineering17 views0 answers0 votesIf the horizontal distance between a staff point and the point of observation is 𝑑, the error due to the curvature of earth is proportional toOpenVideRime asked 1 week ago • Civil Engineering16 views0 answers0 votesThe maximum degree of the curve that can be used for railways in a mountainous region isOpenVideRime asked 1 week ago • Civil Engineering18 views0 answers0 votesAll the vehicles that come during a particular peak hour come during a 10-minute period within this hour. The 15-minute peak hour factor for this peak hour isOpenVideRime asked 2 weeks ago • Civil Engineering24 views0 answers0 votesA hydrocarbon (CnHm) is burnt in air (O2 + 3.78N2). The stoichiometric fuel to air mass ratio for this process is Note: Atomic Weight: C(12), H(1) Effective Molecular Weight: Air(28.8) Ignore any conversion of N2 in air to the oxides of nitrogen (NOx)OpenVideRime asked 2 weeks ago • Civil Engineering16 views0 answers0 votesFecal Coliform (FC) concentration in river water was measured as 10780 cfu/100 ml. The FC concentration after the conventional water treatment, but before chlorination, was measured as 23 cfu/100 ml. The ‘Log Kill’ (inactivation) of FC due to the conventional water treatment is closest toOpenVideRime asked 2 weeks ago • Civil Engineering25 views0 answers0 votesTo derive the total flood hydrograph at a catchment outlet from an isolated storm, the order in which the following methods are applied, from the first method to the last method, isOpenVideRime asked 2 weeks ago • Civil Engineering18 views0 answers0 votesFor a flowing fluid, a dimensionless combination of velocity (𝑉), length scale (𝑙), and acceleration due to gravity (𝑔) would beOpenVideRime asked 2 weeks ago • Civil Engineering18 views0 answers0 votesThe standard plasticity chart for the classification of a fine-grained soil is shown in the figure. As per the Indian standard soil classification system, X representsOpenVideRime asked 2 weeks ago • Civil Engineering18 views0 answers0 votesThe results of a consolidated drained triaxial test on a normally consolidated clay are shown in the figure. The angle of internal friction isOpenVideRime asked 2 weeks ago • Civil Engineering, RCC18 views0 answers0 votesShare this Now with Friends: Share on WhatsApp (Opens in new window) WhatsApp Share on Telegram (Opens in new window) Telegram More
VideRime
