Filter:AllOpenResolvedClosedUnansweredSort byViewsAnswersVotesThe shape of a column should beOpenVideRime asked 5 years ago • Civil Engineering370 views0 answers-1 votesThe term ‘bond’ is used to describe the means by which_________________between steel and concrete is prevented.OpenVideRime asked 5 years ago • Civil Engineering1369 views0 answers-1 votesThe bond between steel and concrete is mainly due toOpenVideRime asked 5 years ago • Civil Engineering1978 views0 answers-5 votesThe longitudinal shearing stresses acting on the surface between the steel and concrete are calledOpenVideRime asked 5 years ago • Civil Engineering1926 views0 answers-1 votesWhen the steel bars are embedded in concrete, the concrete after setting, adhere to the surface of the bars and thus resist any force that tends to pull or push this rod. The intensity of the adhesive force is calledOpenVideRime asked 5 years ago • Civil Engineering794 views0 answers0 votesWhile designing a reinforced concrete pole as a column, it is considered asOpenVideRime asked 5 years ago • Civil Engineering2361 views0 answers-7 votesThe purpose of lateral ties in short reinforced concrete columns is toOpenVideRime asked 5 years ago • Civil Engineering1415 views0 answers-1 votesOpenVideRime asked 5 years ago • Civil Engineering648 views0 answers0 votesIn a RC column, the spacing of longitudinal bars measured along the periphery of column should not exceedOpenVideRime asked 5 years ago • Civil Engineering507 views0 answers0 votesBond strength between steel reinforcement and concrete is affected byOpenVideRime asked 5 years ago • Civil Engineering1133 views0 answers1 votesShare this Now with Friends: Share on WhatsApp (Opens in new window) WhatsApp Share on Telegram (Opens in new window) Telegram More