Questions › Category: RCCFilter:AllOpenResolvedClosedUnansweredSort byViewsAnswersVotesThe maximum diameter of the reinforcement bars in RCC slabs is_________________OpenVideRime asked 3 years ago • Civil Engineering, RCC79 views0 answers0 votesThe main reinforcement of a RC slab consists of 10 mm bars at 10 cm spacing. If it is desired to replace 10 mm bars by 12 mm bars, then the spacing of 12 mm bars should be_________.OpenVideRime asked 3 years ago • Civil Engineering, RCC79 views0 answers0 votesIf the size of panel in a flat slab is 6m x 6m, then as per Indian Standard code, the widths of column strip and middle strip are:OpenVideRime asked 3 years ago • Civil Engineering, RCC77 views0 answers0 votesThe total length of a cranked bar through a distance (d) at 45degree in case of a beam of effective length L, and depth (d) isOpenVideRime asked 3 years ago • Civil Engineering, RCC79 views0 answers0 votesFor a continuous slab of 3m x 3.5m size, the minimum overall depth of slab to satisfy vertical deflection limit isOpenVideRime asked 3 years ago • Civil Engineering, RCC85 views0 answers0 votesThe minimum percentage of steel in R.C.C slabs using mild steel reinforcement is given byOpenVideRime asked 3 years ago • Civil Engineering, RCC89 views0 answers0 votesThe minimum horizontal distance between two main reinforcement bars should beOpenVideRime asked 3 years ago • Civil Engineering, RCC89 views0 answers0 votesThe horizontal distance between parallel main reinforcements in RCC slab shall not be more thanOpenVideRime asked 3 years ago • Civil Engineering, RCC86 views0 answers0 votesThe HYSD reinforcement in RC slab shall not be less thanOpenVideRime asked 3 years ago • Civil Engineering, RCC95 views0 answers0 votesA slab is designed as a two-way slab if the ratio of long span to short span is less thanOpenVideRime asked 3 years ago • Civil Engineering, RCC89 views0 answers0 votes
VideRime