Questions › Category: Civil EngineeringFilter:AllOpenResolvedClosedUnansweredSort byViewsAnswersVotesA capillary tube of diameter 4 mm is dipped into a liquid of specific gravity 0.6. The liquid rises in the tube by 20 mm, making an angle of contact of 0° with the tube. Determine the surface tension of the liquid in contact with air and the glass tube.OpenVideRime asked 11 months ago • Civil Engineering69 views0 answers0 votesWhich of the following is NOT the requirement of an ideal permanent way?OpenVideRime asked 11 months ago • Civil Engineering54 views0 answers0 votesThe bearing of the magnetic meridian of a line is S 32° 10’ W. If the magnetic declination is 7° 40’ East, then the true bearing is _______________.OpenVideRime asked 11 months ago • Civil Engineering55 views0 answers0 votesPavements which have low or negligible flexural strength are called ____________.OpenVideRime asked 11 months ago • Civil Engineering49 views0 answers0 votesThe standard consistency test of cement is conducted by using ________.OpenVideRime asked 11 months ago • Civil Engineering47 views0 answers0 votesWith reference to compression members of steel structures, the slenderness ratio of compression is defined as the _______.OpenVideRime asked 11 months ago • Civil Engineering51 views0 answers0 votesMethod used to establish point in the field. Which of these methods also represents the principle of trgonometrical levelling?OpenVideRime asked 11 months ago • Civil Engineering49 views0 answers0 votesWhich of the following is NOT a field of application of sulphate-resisting cement?OpenVideRime asked 11 months ago • Civil Engineering45 views0 answers0 votesAccording to IS 800:2007, steel purlins are primarily designed as ______OpenVideRime asked 11 months ago • Civil Engineering57 views0 answers0 votesIn a shrinkage limit experiment, mercury is used for:OpenVideRime asked 11 months ago • Civil Engineering51 views0 answers0 votes
VideRime